Software

Direct to

CSM INCA AddOn

Since June, 2005 CSM is member of the ETAS Partner Program for CAN based measurement hardware in INCA.
Within this partnership CSM has developed two CSM INCA AddOns.

CSM INCA AddOn V1.xx

CSM INCA AddOn Version 1.xx

For INCA versionen from V 5.2.1 up to versions less than V 6.0, applicable with completely
integrated CSM MiniModule- and xx-Scan measurement devices.

Functionality:

Configuration and initialization of all CSM CAN bus measurement modules is done
directly from INCA
Support of ETAS CAN bus hardware
(ES580, ES590, ES591, ES690, ES1xxx)
User interface is conform to INCA

CSM INCA AddOn V2.xx

CSM INCA AddOn Version 2.xx

For INCA versions from V 6.0, applicable with completely integrated CSM MiniModul- and xx-Scan measurement devices and with the exhaust measurement technology LambdaCANc, NOxCAN und NOxCANg.

Functionality:

Configuration and initialization of all CSM CAN bus measurement modules is done directly from INCA
Support of ETAS CAN bus hardware
(ES520, ES580, ES581, ES590, ES591, ES690, ES1xxx)
Direkt support ot the lambdametre LambdaCANc
Optional support of further ECM exhaust products

Datenblatt

CSM Config Tool for MiniModules and xx-Scan modules

CSM Config Tool

With our CSM Config Tool we offer a uniform, flexible and convenient user interface for configuration of all CSM measurement modules..

These are at present:

xx-Scan measurement modules

MiniModules CAN

CSM Config Tool is part of delivery and comes up with a considerable range of features:

Support for widely used CAN interfaces

Vector (CANcard X/XL, CANcaseXL, CANboardXL, ... )

ETAS ES580

Kvaser (USBcanII, Leaf, LAPcan, ... )

Peak PCAN-USB

Softing (CANusb, ...)

dSpace DCI-CAN1

National Instruments (PCMCIA-CAN SeriesII, ... )

IXXAT (USB-to-CAN compact, ... )

Automatic detection of all connected CSM CAN modules with serial number.

User defined set-up of CAN bus parameters
(standard and extended frame, bit rate)

AutoConfig for quick and automatic configuration with standard settings

Offline configuration without modules connected for creating configuration for a list of measurement points

Signal definition as a CANdb file

Firmware download

Selection of channels and devices in tree or table view

Tabular online display of all measurement values